Kit: Sanding/Finishing Pro©

<b>Kit: Sanding/Finishing Pro©<b>
Item# FinishKit-ab

Product Description

Aberose™ Pro Sanding/Finishing Kit© will help you sand and finish your Metal Clay creations like a pro, with the tools listed below.

This Kit is to be used with either a Black and Decker variable speed Dremel, with an attached flex shaft, (cost about $60-$90) or with a much more expensive Foredom tool. The speed of either tool should be at least 30,000 rounds per minute.

The following sanding sponges in the Kit may be used to finish your leather hard creations before as well as after firing. Begin with the Medium grit and work your way up to the Micro Fine grit:

Medium l20-180 grits,
Fine 320-400 grits and
Super fine 500-600 grits,
Ultra fine 800-1000 grits, and
Micro Fine 1200-1500 grits.

This Kit also includes:

3 coarse light brown mini-fiber brushes (attach to Dremel or flex shaft),
2 extra-fine dark red mini fiber brushes (attach to Dremel or flex shaft),
Burnisher for highlighting,
4 Mandrels (2 square and 2 slotted),
2 each 220 and 600 grit pieces of sandpaper (4 total attaches to the above mandrels), and
1/2" piece of Red Rouge.

Photo and concept by Rose Marie Bero aka Aberose™. Aberose™ Finishing/Sanding Kit©, is copyrighted © by Aberose™ Creations©, April 2005. United States copyright laws forbid copying.

View Precious Metal Clay "how to" Video Series

U.S.A. Shipments only.
The minimum order is $25.
$6.60 U.S. Priority Mail shipping & handling.
Additional shipping charges, for items over one pound.

Pay easily with PayPal.
Solution Graphics

PayPal's Express Checkout gives you the fastest, easiest way to pay. Pay in fewer steps and get a more streamlined checkout experience. Shop without sharing your financial information with merchants. Plus, you have the choice to pay with your credit or debit card.


Northern California
Hidden Valley Lake, CA 95467

Back Up To The Top